Hey guys,
We are converting the 3rd bay of our garage to a kitchen and need to add a ventilation duct. It is very difficult to bring an additional duct from the main supply. But there is one 9" duct that feeds the living room. The living room does have other ventilation registers so I am not worried about it getting not enough air movement.
My plan was to branch this 9" duct down to 8" using a 9->8 reducer.
Then use a 8-8-8 Tee. Then the living room register that was getting 9" duct would be sized back to 9" from the 8" tee.
The register that feeds the kitchen would then get reduced again to 6" using a 8-6 reducer. The kitchen will have about 150 sq-feet. Does the register need to be near the window and away from the door, or is it okay if I place above the door? (this will make my life very easy).
Thanks!
We are converting the 3rd bay of our garage to a kitchen and need to add a ventilation duct. It is very difficult to bring an additional duct from the main supply. But there is one 9" duct that feeds the living room. The living room does have other ventilation registers so I am not worried about it getting not enough air movement.
My plan was to branch this 9" duct down to 8" using a 9->8 reducer.
Then use a 8-8-8 Tee. Then the living room register that was getting 9" duct would be sized back to 9" from the 8" tee.
The register that feeds the kitchen would then get reduced again to 6" using a 8-6 reducer. The kitchen will have about 150 sq-feet. Does the register need to be near the window and away from the door, or is it okay if I place above the door? (this will make my life very easy).
Thanks!
Branching Duct to Added Kitchen
0 commentaires:
Enregistrer un commentaire