Affichage des articles dont le libellé est Should repair guy actually test parts. Afficher tous les articles
Affichage des articles dont le libellé est Should repair guy actually test parts. Afficher tous les articles

samedi 21 février 2015

Should repair guy actually test parts, or just switch stuff out?

Regarding my Rheem Criterion Furnace (1994), my question is what should I be expecting from the furnace repair guy.



What's happening is on start-up, the draft blower starts, the burners ignite and then the circulation blower starts. However, half the time, the furnace stops about 10 seconds after the circulation blower.



With some reading I gave the flame sensor a good scrub with steel wool -- no change. So I called repair guy who said it was either the flame sensor or the control board, so he replaced the flame sensor ($30 part, $110 for the call). It worked fine for the few test starts while he was here, but sure enough, it continues to misbehave. I expect if I call him them back, they'll suggest changing out the control board.



What surprises me is there is no testing of components -- just change stuff until the problem stops. I'm wondering if there is a sensor/switch that is flaky and is not sensing that the blower is running, and therefore shuts the furnace down.



Should I be expecting someone to actually test components, or just switch out parts based on best guess?



Thanks.

Should repair guy actually test parts, or just switch stuff out?

Popular Posts

Categories

Unordered List

Text Widget

Blog Archive

Followers

Fourni par Blogger.