Im working on installing a fan/light combo switch made by Lutron and need some clarification. Below is the wiring configuration with my question
- Electrical box contains 3 wires:
1. 14/2 power in
2. 14/2 power out
3. 14/3 to fan/light
Luton switch contains 2 brass screws and a ground.
Thus, ground wires get connected; neutrals get connected; power in/power out hots get connected.
This leaves me with red/black from 14/3. If I pigtail off of the connected hots, and connect to 1 brass screw, that leaves only 1 brass screw left for black/red 14/3. How do I proceed?
- Electrical box contains 3 wires:
1. 14/2 power in
2. 14/2 power out
3. 14/3 to fan/light
Luton switch contains 2 brass screws and a ground.
Thus, ground wires get connected; neutrals get connected; power in/power out hots get connected.
This leaves me with red/black from 14/3. If I pigtail off of the connected hots, and connect to 1 brass screw, that leaves only 1 brass screw left for black/red 14/3. How do I proceed?
Wiring Lutron Fan/Light Combo
0 commentaires:
Enregistrer un commentaire