Here in the next month (hopefully!) I will have the basement walls formed and poured for my house, and I want to bring water from the well into the house. Unfortunately after looking at the materials list on my well papers...I am not sure if they used 1" 1 1/4" or 2" SCH 80 PVC from the tank to my frostless hydrant and capped off line. I will find out when I dig down to the capped PVC line. A couple things I am wondering about...The well will only be 30' from the house entry point.
1.) Will 1" or 1 1/4" Poly (NSF Rated @ 160PSI) be the best idea? Is there a specific type of PVC to Poly adapter to use?
and 2.) What is the most fullproof method (so water doesn't leak around the entry) in terms of bringing it (poly pipe) into the basement through the concrete wall? A PVC Sleeve sized bigger than the poly prior to pouring the wall, or drilling through the concrete wall after it has set?
Bringing water in from well
1.) Will 1" or 1 1/4" Poly (NSF Rated @ 160PSI) be the best idea? Is there a specific type of PVC to Poly adapter to use?
and 2.) What is the most fullproof method (so water doesn't leak around the entry) in terms of bringing it (poly pipe) into the basement through the concrete wall? A PVC Sleeve sized bigger than the poly prior to pouring the wall, or drilling through the concrete wall after it has set?
0 commentaires:
Enregistrer un commentaire