I have an outdoor low voltage lighting system with LED bollards and flood lights and I would like to add some low voltage LED string lights to wrap around a couple palm trees. I've had a hard time finding low voltage LED string lights, but I purchased a set and I'm trying to see if I can get them to work.
The set comes with a small plug-in transformer and there is a 3-pin connector that ties into the string of lights. The transformer has two outputs, both at 30V 0.15A.
My question is: can I just splice the wire directly into my existing low voltage system (400W transformer at 12 to 14V)?
There are 3 pins on the connector - I assume one is ground and the other two are for the 2 outputs???
Low Voltage Lighting Solution
The set comes with a small plug-in transformer and there is a 3-pin connector that ties into the string of lights. The transformer has two outputs, both at 30V 0.15A.
My question is: can I just splice the wire directly into my existing low voltage system (400W transformer at 12 to 14V)?
There are 3 pins on the connector - I assume one is ground and the other two are for the 2 outputs???
0 commentaires:
Enregistrer un commentaire