Replacing Emerson 3 wire condenser fan motor with Rescue 5 wire-how to wire?

Old motor is

.

3 wire connections black, red and brown.







New motor is a Rescue model 5462 :

1/3 - 1/2 HP
208-230 Volt
1075 RPM
2.6-1.8 Amps
Capacitor not included

When I started having problems, before buying a new motor, I replaced the capacitor to the existing motor hoping that would fix the problem, it did for a few minutes then the motor sounded like the bearings we're going out and smelled hot. The capacitor for the existing motor is 30 + 5.0 MFD. 440/370 VAC .

Old configuration...Black is to the lead in, brown is to fan on the capacitor, red is to common on the capacitor.

My questions are:

How to connect the five wires on the new motor. Black, Red, White, Brown and Brown with white stripe. The side of the box says black is the lead color for 1/3 HP. So Black to replace my existing black wire?

The red wire from my old motor is jumped from the motor to a connection then to the C on the capacitor will that need to be done on the new motor? (Pic Above)

Is my "just replaced" existing capacitor appropriate for this motor? The box stating I need 7.5 mfd / 370@280v OR. 5.0 mfd / 370@230v

Thank in advance!

Attached Images

     

Replacing Emerson 3 wire condenser fan motor with Rescue 5 wire-how to wire?