jeudi 9 avril 2015

Proper nozzle selection for pressure washer, in particular a turbo nozzle

I recently purchased a 3,100 psi and 2.8 gpm 6.5 HP pressure washer. I am trying to determine what would be the best orifice size to use and would appreciate any guidance. I have researched online and found some nozzle selection charts. However, my pressure washer ratings fall in between the 3.0 and 3.5 orifice sizes.



Using a 3.5 orifice, the flow would be over 3 gpm at 3100 psi.

Using a 3.0 orifice, the flow would be slightly over 2.6 gpm at 3100 psi.



My understanding is that my pressure washer would be able to maintain 3100 psi with the 3.0 orifice at full throttle with a little sacrifice of flow.



I do not want to damage my pressure washer with an undersized nozzle orifice and want the best cleaning ability, even at lower throttle levels also, if possible. Any guidance on what would be the best orifice size from those with experience?

Proper nozzle selection for pressure washer, in particular a turbo nozzle

0 commentaires:

Enregistrer un commentaire

Popular Posts

Categories

Unordered List

Text Widget

Blog Archive

Followers

Fourni par Blogger.