So, buddy of mine has a poulan 2025 chainsaw, sat for a year, won't start. LONG story short....replaced the cracked fuel lines, air filter, spark plug (gapped at 25 thousandths as required) fuel filter, and the carb since it was so cheap, fresh gas 40:1 as required. Starts (sometimes) and dies, sometimes starts and idles, dies when pulling trigger, couple times it would rev up and run, ready to go, then just dies. The compression is at a healthy 110psi. Im at a loss, any help? I have tried to adjust the carb, turning the high and low in till it just seats, then start with one full turn out on each, but never can really get it to stay running long enough to work on the adjustments. I know its a cheap saw, but i only have $30 into it. Any help/advice will be much appreciated!
poulan 2025 chainsaw
0 commentaires:
Enregistrer un commentaire