Hiya
I am new to the forum so hello and i hoping that someone might be able to point in the right direction please!
This is the model of Generator i have
SE4000DL 4.0kVA / 3.2KW / LOMBARDINI 15LD 350
I dont believe the alternator is burnt out as i have the 220v working just fine.
If the 110v was the only voltage i believe the motor could potentially be burnt out if i am corrcet?
I am correct in assuming that the 2 phases or sides of the winding work in series to produce the 220v output and work independently to produce 110v?
The trip switches seem to be ok and theres no evidence of overheating or burnt wires. I will check the capacitors but not sure this will help much if the 220v its working ok.
After this my knowledge is limited and only believe theres the rotating diodes that could be the symptom.
Please help
Bumpy!
I am new to the forum so hello and i hoping that someone might be able to point in the right direction please!
This is the model of Generator i have
SE4000DL 4.0kVA / 3.2KW / LOMBARDINI 15LD 350
I dont believe the alternator is burnt out as i have the 220v working just fine.
If the 110v was the only voltage i believe the motor could potentially be burnt out if i am corrcet?
I am correct in assuming that the 2 phases or sides of the winding work in series to produce the 220v output and work independently to produce 110v?
The trip switches seem to be ok and theres no evidence of overheating or burnt wires. I will check the capacitors but not sure this will help much if the 220v its working ok.
After this my knowledge is limited and only believe theres the rotating diodes that could be the symptom.
Please help
Bumpy!
Stephill Generator SE4000DL No Output on 110v but has 220v Output Fine!
0 commentaires:
Enregistrer un commentaire